Service · Riverside, CA
Commercial Countertops in Riverside, CA That Open On Schedule
Riverside Custom Countertops fabricates and installs commercial countertops in Riverside, CA for restaurants, labs, clinics, offices, retail floors and multi-unit residential buildings. We work in stainless steel, phenolic and epoxy resin lab tops, engineered quartz, solid surface, granite, porcelain, tempered glass and high-pressure laminate, and one contract covers digital templating, tear-out and disposal, seam layout, integrated sink fabrication, edge profiles, backsplash and final sealing.
Our crews run job sites across Riverside County, from the Mission Inn and Fox Performing Arts Center corridor downtown out to Canyon Crest, La Sierra and the University neighborhood, with trucks staged for Interstate 215, State Route 60 and State Route 91.
Get your free written quote
Send your details and we reply the same business day. No obligation, and the estimate is in writing.
Or call (951) 589-3336 — calls only, we don't receive text messages.
Thanks, we have your request.
We reply the same business day, Monday through Saturday. For same-day scheduling call (951) 589-3336.
Free written estimate
Digital templating
Cut in our Riverside shop
Licensed & insured
01
What We Build for Riverside Businesses
Commercial work is not a bigger kitchen job. The surfaces take abuse, inspection standards are stricter, and the schedule belongs to somebody else. We fabricate and install:
- Commercial kitchen prep, dish and pass-through counters
- Laboratory and classroom casework tops for school and research buildings
- Reception desks, transaction counters and nurse stations
- Restroom vanity decks, including multi-lavatory runs
- Breakroom, pantry and shared-office counters
- Retail display, checkout and point-of-sale surfaces
- Hospitality bar tops, front desks and guest room vanities
- Apartment and condo turnover packages, unit by unit
Riverside supplies that demand. The city holds 314,998 residents inside a county of 2,418,185. University of California, Riverside, California Baptist University, Riverside City College and La Sierra University's 150-acre campus keep food service, lab and dormitory casework in rotation, and March Air Reserve Base sits on the city's eastern edge.
02
Commercial Countertop Materials, and When Each One Makes Sense
Stainless Steel for Commercial Kitchens
Stainless is the default behind a hot line. It is non-absorbent, takes hot pans, and cleans down to bare metal. The real advantage is fabrication: sinks are welded directly into the top and the joint is ground until it disappears, so there is no seam, no caulk bead and nothing for a health inspector to flag. We specify thicker gauge material rather than layer buildup, which keeps deflection out of long prep runs.
Phenolic and Epoxy Resin Lab Tops
For teaching labs, clinics and research benches, phenolic resin is the workhorse. It is lightweight and chemically resistant to roughly 350°F (177°C), which covers most bench chemistry. Where the work runs hotter we move to epoxy resin. Both fabricate cleanly around fume hoods, sink cutouts and service fittings.
Quartz and Solid Surface for Reception and Restrooms
Engineered quartz is 90 to 93 percent crushed quartz bound in 7 to 10 percent polyester resin. It is effectively non-porous, hits about 7 on the Mohs scale against marble's 3, and never needs sealing. Two limits: keep it under 150°C and off sudden thermal shock, and never spec it outdoors, because the resin is not UV stable. Solid surface (acrylic or polyester, about 12mm thick) suits long reception desks and restroom decks. Edges build up in two or three stacked layers, joints are glued and sanded to almost no visible trace, and damage sands out in place.
Glass and Stone for Retail and Hospitality
Tempered and textured glass is non-porous, close to stain-proof, heat resistant to around 700 degrees, and it back-lights well on a bar. Granite wins on presence: an interlocking quartz, feldspar and mica matrix at 2.65 to 2.75 g/cm3, compressive strength usually above 200 MPa. It needs periodic sealing against acids, which we schedule rather than leave to your staff.
Laminate for Budget-Driven Build-Outs
High-pressure laminate is kraft and decorative papers bonded with melamine resins over particle board, MDF or plywood, the sheet running .030" to .040". It is the most economical surface on the market, ships in 8, 10 and 12 foot rough lengths, and post-forms cleanly for back offices and value-tier apartment interiors. Heavy knife scarring cannot be disinfected, so we keep it out of food-contact zones.
| Material | Best commercial use | Heat | Maintenance | Relative investment |
|---|---|---|---|---|
| Stainless steel | Commercial kitchens, dish areas | Excellent | Low | Mid to higher |
| Phenolic resin | Teaching and clinical labs | To about 350°F | Low | Mid |
| Epoxy resin | High-heat labs | Highest | Low | Higher |
| Engineered quartz | Reception, restrooms, breakrooms | Under 150°C | None, no sealing | Mid to higher |
| Solid surface | Long desks, lavatory decks | Moderate | Low, repairable | Mid |
| Granite | Lobbies, hospitality | Very good | Periodic sealing | Higher |
| Glass | Bars, retail display | To about 700°F | Low | Higher |
| Laminate | Back-of-house, unit turnovers | Limited | Low, not repairable | Lower |
03
What Drives the Cost of a Commercial Countertop Project
We quote in writing after a site walk, never off a phone description. The variables that move a commercial number are material grade and slab count, linear footage and how much of it runs continuous, edge profile, the number and placement of seams, sink and cooktop cutouts, whether sinks are drop-in or welded and integrated, tear-out and disposal, backsplash type, plumbing disconnect and reconnect, overhang and knee-space support steel, and delivery logistics including stair access and loading dock windows. After-hours or phased labor is its own line, and so is anything an inspector has to sign off on.
04
How We Work Around Your Operating Hours
Closing a business to replace counters is rarely acceptable, so we plan the sequence backward from your calendar.
Site walk and digital templating.
We template with dxf files and photograph slabs for virtual layout, so you approve seam placement before anything is cut.
Shop pre-machining.
Cutouts and edge work happen at the shop on routers, grinders and CNC. Site time drops to setting and joining.
Phasing.
A restaurant gets the cold side one night and the hot side the next. A clinic gets one wing at a time. An office gets floor by floor.
After-hours installation.
Overnight sets, early-morning finishes, the space handed back clean before open.
GC coordination.
We work to the general contractor's schedule, hold our own submittals, and sequence between casework, plumbing and final inspection.
05
ADA Counter Heights and Code Details
Standard fixed counters sit 35 to 36 inches off the floor and 25 to 26 inches deep. Accessible service counters and transaction windows sit lower, and the height, reach and knee clearance come from the accessibility standard on your permit set. We build to the dimensions the architect or plan checker specifies and add the support steel that unbraced accessible overhangs require. Confirm the spec before fabrication. Reworking a mounted stone top is slow.
06
Multi-Unit, Property Management and Volume Work
Riverside has 100,255 housing units and 45.8 percent are renter-occupied, which puts a lot of vanity tops and kitchen counters on turnover cycles. We price volume work per unit, hold one material and edge across a property so future replacements match, and stage deliveries so units come back online in order. Property managers in Arlington, Casa Blanca and Eastside use us for rolling replacements instead of one shutdown.
07
Materials We Fabricate
Surfaces we install most across Riverside projects: stainless steel countertops in Riverside, quartz countertops in Riverside, granite countertop installation, laminate countertops in Riverside, porcelain countertops, recycled glass countertops, concrete countertops in Riverside, marble countertops, quartzite countertop options, and copper countertops.
08
Service Areas Across the Inland Empire
| Area | Typical commercial scope |
|---|---|
| Moreno Valley | Breakroom and clinic counters |
| Corona | Retail and restaurant build-outs |
| Jurupa Valley | Industrial and office counters |
| Norco | Restaurant and office counters |
| Eastvale | New construction build-outs |
| Perris | School and office casework |
| Colton | Medical and lab casework |
| Grand Terrace | Small office and retail |
| Redlands | Restaurant and retail counters |
| Fontana | Multi-unit residential turnovers |
Inside the city we cover ZIP codes 92501 through 92509, including Downtown, Mission Grove, Orangecrest, Hawarden Hills and the Magnolia Avenue and Arlington Avenue corridors.
09
Related Services
Commercial clients also book countertop fabrication in Riverside, countertop replacement, commercial countertop repair, sealing and polishing services, and bathroom vanity tops in Riverside.
10
Why Riverside Businesses Hire Riverside Custom Countertops
Riverside Custom Countertops is licensed and insured, and we carry the documentation your GC and property owner will ask for. We also take fabrication safety seriously. Cutting engineered quartz releases respirable silica dust, and California had documented 500 silicosis cases among fabrication workers as of January 2026, with 72 percent of shops out of compliance with federal silica standards. The state approved emergency regulations in December 2023. We control dust with wet cutting, local exhaust ventilation and respiratory protection, which keeps your project with a shop that will still be operating next year.
Questions
Frequently Asked Questions
Or call us on (951) 589-3336. Calls only — we do not receive text messages.
Can you install after hours so we do not close?
Yes. Overnight and weekend installs are standard. Restaurants, clinics and retail spaces get phased so part of the operation keeps running.
How fast can you get to my site in Riverside?
Site walks are usually scheduled within a few business days. Fabrication lead time depends on material availability and slab count, and the written quote carries a firm date.
Do you work directly with our general contractor?
Yes. We handle submittals, coordinate with casework and plumbing trades, and sequence our install so it does not hold up final inspection.
What is the best countertop for a commercial kitchen?
Stainless steel, in most cases. The welded integrated sink with the joint ground smooth removes the seam that causes sanitation problems in other materials.
Which surface should a school lab use?
Phenolic resin for standard bench work, since it resists chemicals to about 350°F. Epoxy resin where temperatures run higher.
Can you replace counters in an apartment building unit by unit?
Yes. Volume turnover work is priced per unit and staged so vacancies come back on the market in sequence rather than all at once.
Are estimates free?
Yes. We provide a free written quote after a site walk, itemized by material, fabrication, tear-out, install and after-hours labor.
Do you handle ADA-height counters?
Yes. We fabricate to the heights and clearances on your permitted drawings and add the support required for accessible knee-space overhangs.
Materials
Eighteen surfaces we fabricate
Granite
Heat-tolerant natural stone, the widest slab selection locally.
Quartz
Engineered, non-porous, never needs sealing. Indoors only.
Quartzite
Harder than granite with marble-like movement.
Marble
Classic veining, acid sensitive, superb on vanities.
- Granite
- Quartzite
- Quartz
- Marble
- Soapstone
- Slate
- Travertine
- Limestone
- Onyx
- Butcher Block
- Wood
- Concrete
- Porcelain
- Ceramic Tile
- Stainless Steel
- Copper
- Recycled Glass
- Laminate
- All materials
Service areas
Cities we cover
Free quote
Get a Free Commercial Countertop Quote
Send drawings or book a site walk and we will return an itemized written quote with a real install date. Riverside Custom Countertops, 6550 Van Buren Blvd, 1st Floor Ste D, Riverside, CA 92503. Call (951) 589-3336 to schedule. ---
- Same business day response, Mon–Sat 7am–6pm.
- No obligation — templating and the written quote are free.
- You speak to the fabricator, not a call centre.
Request your quote
Name, number, and what you need.
Or call (951) 589-3336 — calls only, we don't receive text messages.
Thanks, we have your request.
We reply the same business day, Monday through Saturday. For same-day scheduling call (951) 589-3336.