Fontana, California
Countertops in Fontana, CA, Cut in Riverside and Installed to Fit Your House
Riverside Custom Countertops fabricates and installs countertops in Fontana, CA, working out of our shop in Riverside. We handle kitchen countertop installation, bathroom vanity tops, full countertop replacement, countertop repair, custom fabrication, sealing and polishing, and outdoor kitchen countertops built for San Bernardino County sun.
Our crews run to Fontana every week, from the tract streets of Hunter's Ridge and the Sierra Lakes Parkway corridor down to South Fontana and the older blocks off Foothill Boulevard, the stretch of historic Route 66 that crosses the city.
Get your free written quote
Send your details and we reply the same business day. No obligation, and the estimate is in writing.
Or call (951) 589-3336 — calls only, we don't receive text messages.
Thanks, we have your request.
We reply the same business day, Monday through Saturday. For same-day scheduling call (951) 589-3336.
Free written estimate
Digital templating
Cut in our Riverside shop
Licensed & insured
01
Countertop Services We Deliver Across Fontana
Fontana is the second-most-populous city in San Bernardino County, home to 208,393 people at the 2020 census and the 20th largest city in California. That is a lot of kitchens, and about two thirds of them sit in owner-occupied homes, so most of our calls here come from people improving a house they plan to keep. Every service below is performed by our own installers, never subbed out.
| Service | Best For |
|---|---|
| Kitchen countertop installation | New slabs on new or existing cabinets |
| Bathroom vanity tops | Hall baths, primary suites, double vanities |
| Countertop replacement | Retiring dated tops without a full remodel |
| Countertop repair | Chips, cracks, burns, failing seams |
| Custom countertop fabrication | Islands, waterfall edges, odd angles |
| Refinishing and resurfacing | Reviving a top that is sound underneath |
| Sealing and polishing | Upkeep for granite, marble, quartzite |
| Outdoor kitchen countertops | BBQ islands, patio bars, full sun |
| Commercial countertops | Offices, break rooms, reception counters |
Replacement leads the list in Fontana by a wide margin, with vanity work close behind. If you are not sure whether a top can be saved, ask during the estimate and we will tell you straight.
Countertops for Fontana Businesses
Fontana has grown into a regional hub of the trucking industry, and that brings us steady commercial work: reception counters and break room tops for logistics offices, plus durable work surfaces for fleet facilities and dispatch rooms. Commercial jobs get the same shop fabrication as our residential work, scheduled around your operating hours.
02
Fontana Houses by Era, and What Each One Needs
Fontana was founded in 1913 by Azariel Blanchard Miller and incorporated in 1919, and it has reinvented itself twice since. It started as citrus orchards, vineyards and chicken ranches. Henry J. Kaiser built the Kaiser Steel plant here during World War II, one of only two steel mills west of the Mississippi at the time, and Auto Club Speedway now sits on the former mill site. Today the city runs on trucking and logistics. Each chapter left housing behind, and each vintage of house calls for different countertop work.
The oldest pockets near downtown, at about 1,237 feet of elevation along the Foothill Boulevard corridor, date to the citrus and ranch era. These kitchens are small, the cabinet boxes are often original, and tops have usually been replaced two or three times already. We template these carefully because nothing in a pre-war kitchen is square, and we often recommend reinforcing cabinets before setting stone.
Mid-century neighborhoods built for Kaiser-era workers are the classic replacement job. Tile and early laminate counters from those decades are worn past saving, and swapping them for granite or quartz on the existing cabinets transforms the room without touching the layout.
Then came the big tract waves of the 1990s and 2000s that built out Hunter's Ridge, Panorama, the Sierra Lakes Parkway corridor and South Fontana. Those kitchens got builder-grade tops that are now twenty to thirty years old, and this is where most of our Fontana volume comes from. The city skews young, with growing families and household incomes that run higher than much of the Inland Empire, so the typical call is an upgrade: pull the builder top, add an island or a waterfall edge, and put in a surface that matches how hard the kitchen actually works.
03
Materials Fontana Homeowners Ask For
We fabricate a full range of materials in our Riverside shop. These ten come up most often on Fontana estimates.
| Material | The Honest One-Liner |
|---|---|
| Quartz countertops | Non-porous, never needs sealing, the default for busy indoor kitchens. Not for outdoors, its resin is not UV stable. |
| Granite countertops | Dense natural stone that handles hot pans and full Fontana sun, indoors or out, with periodic sealing. |
| Quartzite countertops | Natural stone harder and more stain resistant than granite, with the look of marble. |
| Porcelain countertops | Fired at about 1,200C with essentially no porosity, a strong pick for patio bars and bright kitchens. |
| Marble countertops | Beautiful but soft and acid sensitive, best in baths and low-traffic spots. |
| Butcher block countertops | Warm, renewable and great on islands, needs regular oiling. |
| Concrete countertops | Cast to any shape, a natural fit for custom BBQ islands. |
| Soapstone countertops | Dense and remarkably heat tolerant, darkens into a natural patina over the years. |
| Stainless steel countertops | Seamless, hygienic and tough, popular for serious cooks and commercial kitchens. |
| Laminate countertops | The most economical option on the market, far better looking than the sheets it replaces. |
One rule we repeat on every outdoor estimate in town: no engineered quartz outside. Its polyester resin degrades under UV, and a west-facing BBQ island in South Fontana gets punished by afternoon sun. We spec granite or porcelain out there instead.
04
How the Process Works From Our Riverside Shop
We are based in Riverside and reach Fontana up I-15 or the 60 through Jurupa Valley, which borders Fontana directly to the south. Once we exit onto I-10 or SR 210 we can be anywhere in the city within minutes. The job takes three visits.
Template.
We measure with digital templating, confirm sink, cooktop and edge details, and photograph the slab layout so you approve seam placement before a single cut.
Fabricate.
Cutting, edging and polishing happen in our shop on routers, grinders and CNC equipment, with wet cutting and dust controls. Your kitchen stays clean.
Install.
The crew drives up, sets the tops, secures sinks, seals natural stone and walks the job with you before leaving.
Typical turnaround from template to install runs one to two weeks depending on material.
05
What Drives the Investment
No two jobs match, so we quote each one from scratch. What moves the number, up or down:
- Material. Laminate sits at the lower end, granite and quartz in the mid range, quartzite, marble and specialty surfaces higher.
- Square footage and layout. A galley kitchen and an L-shape with a big island are different jobs.
- Edge profile. A simple eased edge costs less than an ogee or a built-up waterfall.
- Tear-out. Removing tile set in mortar takes longer than lifting old laminate.
- Sink and cooktop cutouts. Undermount sinks need finished, polished openings.
- Cabinet condition. Older Fontana kitchens sometimes need reinforcement before stone goes on.
Every estimate is free, written and itemized, so you can see exactly where the number comes from.
06
Nearby Areas We Also Serve
Fontana sits at the center of our northern service run, and jobs there often pair with work in the surrounding cities. We also take calls from adjacent Rialto and Rancho Cucamonga.
| City | County | Typical Run From Our Shop |
|---|---|---|
| Jurupa Valley | Riverside | On the way, directly south of Fontana |
| Colton | San Bernardino | Short hop east along I-10 |
| Grand Terrace | San Bernardino | Just past Colton off I-215 |
| Redlands | San Bernardino | Farther east on I-10 |
| Eastvale | Riverside | West side, off I-15 |
| Norco | Riverside | Down I-15 toward Corona |
| Corona | Riverside | Southwest along SR 91 |
| Moreno Valley | Riverside | East of our shop on SR 60 |
| Perris | Riverside | South on I-215 |
Our home base is Riverside itself. If you are closer to the shop, start with our page on countertops in Riverside.
07
Why Fontana Homeowners Choose Riverside Custom Countertops
Riverside Custom Countertops is licensed and insured, and our installers are employees, not day labor. Everything is fabricated in our own Riverside shop, so there is no middleman between the person who templates your kitchen and the person who cuts the stone. We have worked in Fontana houses of every era and template accordingly instead of assuming every wall is straight. Estimates are free and written, seam placement is approved by you before cutting, and we stand behind the installation.
08
Ready for New Countertops in Fontana?
Your kitchen should work as hard as this city does. Call Riverside Custom Countertops at (951) 589-3336 for a free written estimate on countertops in Fontana, CA, and we will bring samples to your door, whether you are off Sierra Lakes Parkway, in South Fontana, or on one of the original streets near Route 66.
Questions
Frequently Asked Questions About Countertops in Fontana
Or call us on (951) 589-3336. Calls only — we do not receive text messages.
Do you serve all Fontana ZIP codes?
Yes. We cover 92331, 92334, 92335, 92336 and 92337, which takes in everything from Hunter's Ridge and Sierra Lakes Parkway in the north to South Fontana below I-10.
How far away is your shop, and is there a travel fee?
The shop is in Riverside, a straightforward run up I-15 or the 60 through Jurupa Valley. Fontana is core territory for us, and any travel component appears in the written quote, never added later.
Can you replace my builder-grade top without replacing the cabinets?
Usually, yes. Most 1990s and 2000s tract cabinets in neighborhoods like Panorama are structurally fine. We verify they are level and sound during templating, and if reinforcement is needed we tell you before work starts.
Should I repair my countertop or replace it?
Chips, small cracks and failing seams in stone can often be repaired at a fraction of replacement. Delaminating laminate and heavily scarred surfaces are usually better replaced. We give you both numbers when repair is realistic.
How long does the whole job take?
Template to install typically runs one to two weeks. The install itself is usually done in a day, and your kitchen stays usable until the old top comes out.
What should I use for an outdoor kitchen in Fontana?
Granite or porcelain. Engineered quartz discolors under UV, and Fontana patios get intense sun most of the year.
Are estimates really free?
Yes. Every estimate is free, written and itemized, whether it is a single vanity in a Kaiser-era bathroom or a full kitchen with an island.
Are you licensed and insured?
Riverside Custom Countertops is licensed and insured, and we are glad to provide documentation with your written estimate.
Services
Countertop services we offer
- Kitchen Countertop Installation
- Bathroom Vanity Tops
- Countertop Replacement
- Countertop Repair
- Custom Fabrication
- Refinishing & Resurfacing
- Sealing & Polishing
- Outdoor Kitchen Countertops
- Commercial Countertops
- All services
Materials
Eighteen surfaces we fabricate
Granite
Heat-tolerant natural stone, the widest slab selection locally.
Quartz
Engineered, non-porous, never needs sealing. Indoors only.
Quartzite
Harder than granite with marble-like movement.
Marble
Classic veining, acid sensitive, superb on vanities.
- Granite
- Quartzite
- Quartz
- Marble
- Soapstone
- Slate
- Travertine
- Limestone
- Onyx
- Butcher Block
- Wood
- Concrete
- Porcelain
- Ceramic Tile
- Stainless Steel
- Copper
- Recycled Glass
- Laminate
- All materials
Service areas
Cities we cover
Free quote
Get your free written estimate
Call or send the form. Free templating, written scope, no obligation.
- Same business day response, Mon–Sat 7am–6pm.
- No obligation — templating and the written quote are free.
- You speak to the fabricator, not a call centre.
Request your quote
Name, number, and what you need.
Or call (951) 589-3336 — calls only, we don't receive text messages.
Thanks, we have your request.
We reply the same business day, Monday through Saturday. For same-day scheduling call (951) 589-3336.